1. To Lower Liability
Backflow preventers are gadgets that are installed on the water pipes of your pipes. They are used to allow water in the pipelines to flow in one direction only. Its main purpose is to keep drinking water safe from contamination caused by backflow.
In most homes, in-ground pools, dishwashers, grass irrigation systems, washing machines, and boiler heaters are all standard. If you have any of these water-using appliances, your home may be vulnerable to backflow.
Installing a backflow preventer and doing backflow testing can help mitigate the risk of having the water in your pipes flow backward. By installing a backflow preventer, your valuable equipment and pipes will be safe from damage or severe breakdowns that might be costly to fix.
2. To Minimize On Plumbing Problems
Most backflow preventer-equipped homes do not have as many plumbing issues as those without. Unless you are an expert, you may not be able to identify if your drainage system has a plumbing problem.
If you have any plumbing issues, a backflow preventer will help you remain on top of the situation. However, if you spot a plumbing issue, call a professional right away. Professionals will be able to do backflow testing, obtain the necessary backflow preventer repair parts, and resolve the issue.
It is indeed important to get your plumbing issues resolved as soon as possible. If left unaddressed, these issues may exacerbate the original problem, costing you more money in the long run.
3. To Prevent Potential Contaminants
Contaminants can be found practically anywhere. Because the water that flows from your taps passes through multiple connections before reaching your home, there’s a good chance that contaminants will end up in your clean water.
Backflows occur when water pressure changes, causing the water to flow in the opposite direction. For example, when there is too much water in the system or when the pipes freeze, the pressure in the pipes drops. The sewage or groundwater that enters the pipelines can be filthy. When the polluted water gets into the pipe, it can flow into your home, causing you to drink tainted water.
Contaminated water can serve as a breeding ground for bacteria, resulting in diseases like diarrhea, cholera, typhoid, hepatitis A, and dysentery. A backflow preventer keeps the sewage water out of your clean water supply, ensuring that your water is always safe for consumption. You may also want to clean your drainage after the installation of the backflow preventer to minimize further contamination.
4. It’s Worth Your Peace of Mind
It’s frightening to think that your freshwater source could be poisoned. Installing a backflow preventer, on the other hand, can reduce the chances of this happening. It is worth it to select an option that will alleviate your anxieties. Once a backflow preventer has been installed, it must be tested to confirm that it is functioning properly.
When testing the backflow preventer, plumbers make sure that any backflow concerns are addressed, and you do not have to worry about contamination.
While you’re at it, hire a professional plumber to perform backflow testing, which includes pressurizing the water system, inspecting the components for proper operation, and changing any valves that need to be replaced.
5. It is a Legal Requirement
In most states, backflow preventers are required to be installed in households and also in workplaces. Not only the Environmental Protection Agency (EPA) but also government entities enforce backflow testing.
You may be fined if you do not install a backflow preventer. In some states, having backflow preventers for low and high hazard cross-connections is required by law.
As a law-abiding citizen, you should consult with a qualified plumber to determine the best backflow preventer for your needs. This will keep you from having to deal with any unneeded legal troubles.
You’re at risk if you haven’t installed a backflow prevention device. Contact a professional plumber to assist you to get started and to answer any questions you may have.