Porcelain tiles give an extraordinary look to our home interior design and it’s very important to take care of its cleaning. Here in this article, we will provide the best information about how to clean porcelain tiles.
How to clean porcelain tiles
Porcelain tiles are a popular material for interior floors and walls which are made by the best porcelain tiles manufacturers. It is also used for outdoor work in the arrangement of terraces, swimming pools, gazebos, etc., while the technology of placing the material and carrying out the related construction operations presupposes the inevitable entry of various polluting and aggressive substances on the surface of porcelain tiles, the main of which are:
Primer and paint
These and other materials remove quite well from the surface of porcelain tiles immediately after contact with it. This is done with a damp cloth until the stains have hardened. Otherwise, removing dirt from the floor becomes much more difficult. At the same time, there are specialized tools on sale that must be used in especially difficult cases. However, most of the time, you can get by with inexpensive and simple recommendations on how to porcelain tiles manufacturers clean tiles after renovation.
In any case, it should be remembered that it is recommended to previously check an aggressive cleaning agent for its safety and effectiveness for porcelain tiles. This should be done in an area that is not conspicuous, and only then process the entire room.
A smooth, shiny surface is easier to clean. For matte porcelain tiles or material with a shallow relief, there is a risk of deep penetration of building mixtures, which will significantly complicate their removal.
How to clean glue from porcelain tiles
Tile adhesive is a prediluted mix, which is applied to the subfloor surface during porcelain tile installation, leveled and serves as a bonding and leveling layer. One of the main characteristics of this solution is a greater adherence to concrete and to the porcelain tiles itself. Therefore, after hardening, the glue is not easy to remove.
For this reason, it is recommended to thoroughly clean the remains of the adhesive solution that have fallen on the surface of the porcelain tiles during installation. Large dirt can be easily removed with a putty knife and minor dirt can be wiped off with a damp cloth.
If during the installation it was not possible to completely clean the porcelain tiles, it is necessary to carry out the following sequence of operations:
softening of the material – carried out with the help of water, to which it is better to add ammonia or vinegar. If polymer glue was used during installation, the contamination must be carefully treated with acetone
Mechanical removal of adhesive residue is done with any convenient sharp object. For this, a scraper, sandpaper, spatula, knife, hard sponge can be used. In some cases, such as when using epoxy-based adhesives, it is recommended to use solvent-based cleaners suitable for the specific adhesive.
How to clean the grout of porcelain tiles
Porcelain tiles are placed on the floor and walls, leaving joints between the individual tiles. This is due to the fact that even within the same batch, the sizes of individual piece products may differ due to the peculiarities of the shrinkage of the material during firing. Therefore, the plastic crosses are installed between the individual tiles during installation, allowing you to form the same seam between them. The joints are subsequently filled with a special grout using a rubber trowel. As a result, some of the material inevitably remains on the surface of the best porcelain tiles and requires immediate removal. Wetting the porcelain tiles before grouting will make scrubbing the grout easier.
Even if the grout has started to harden and become light in color, it can be removed with a stiff sponge and a damp cloth. If enough time has passed and the dirt cannot be soaked in, acid-containing powders or liquids should be used. You can cook them yourself or use ready-made household chemicals. It should be borne in mind that on some types of flooring, for example, with a metalized surface, such processing can leave light spots. When using epoxy grout, removing stains without special tools is difficult and requires the use of a special epoxy solvent.
How to remove other contaminants from porcelain tiles
Lumps of putty, cement, and other similar materials stuck to the floor are removed quite effectively by mechanically scraping with a knife, a plastic or metal putty knife, or a blade. Large pieces can be easily removed by hand.
The remains of primer and paint are more resistant and are practically not removed by mechanical methods. It is best to clean them with solvents specifically designed for this type of paint. Oil and acrylic paints can be removed with White Spirit and other similar solvents, while water-based paints can be removed with a damp cloth. If the stain is quite old and does not rub off, it is recommended to place a solvent-soaked cloth on it before removing the stain from porcelain tiles.
How are porcelain tiles washed?
After the repair, in any case, the final wet cleaning is carried out, the purpose of which is to remove dirt and dust. First of all, the removal of dusty materials is carried out, if possible, with a vacuum cleaner.
If lime or similar materials are used for finishing work, stains may remain on the floor and walls. In this case, the surface is rinsed with plenty of water and then particularly soiled areas are cleaned with a sponge soaked in detergent. In the final stage, the porcelain tiles are thoroughly washed.
For wet cleaning you can use:
glass washing liquid
water with lemon
an aqueous solution of vinegar
Our Most Related Post: How to Clean Home After Remodeling is Complete?
From the above information, we noticed that the cleaning process of porcelain tiles is not difficult but it is very important to clean porcelain tiles to give them extraordinary looks. Just follow the process and clean the tiles.
- This is a guest post not written by the websites’ owner